Relay Wireless Bridge
Model: DS006-RELAY
MSRP: $395

Click on the boxes below to get detailed information about the Relay Wireless Bridge

Standard Documentation


Additional Products

Relay Pro
Wireless Bridge

Plug and Play I/O for Advanced Relay Controls

Wiegand
Wireless Bridge

Plug and Play I/O for Wiegand Access Control Systems

Access Pro
Wireless Bridge

Plug and Play I/O for Advanced Access Control Systems

HVAC
Wireless Bridge

Plug and Play I/O for Conventional HVAC Systems

HVAC Expansion
Wireless Bridge

Additional Equipment Unit for HVAC Wireless Bridge

Analog
Wireless Bridge

Plug and Play I/O for Industrial Controls

Serial Pro
Wireless Bridge

Plug and Play I/O for Low Bandwidth Serial Data

I/O Description from Left to Right
  1. R3 NO - Normally Open output for Relay 3
  2. R3 COM - Common output for Relay 3
  3. R3 NC - Normally Closed output for Relay 3
  4. GND - Ground Input for Relay 1
  5. R1 IN - Input for Relay 1
  6. GND - Ground Input for Relay 2
  7. R2 IN - Input for Relay 2
  8. R4 NO - Normally Open output for Relay 4
  9. R4 COM - Common output for Relay 4
  10. R4 NC - Normally Closed output for Relay 4
I/O Description from Left to Right
  1. 12v - Power Input 12v DC
  2. GND - Ground Input for Power
  3. BAT+ - Power Input from Battery
  4. GND - Ground Input from Battery
  5. NC - No Connection
  6. GND - Ground Output for Wiegand Lines
  7. NC - No Connection
  8. NC - No Connection
  9. IN 1 - Auxiliary data input
  10. OUT 2 - Auxiliary data output
I/O Description from Left to Right
  1. R1 NO - Normally Open output for Relay 1
  2. R1 COM - Common output for Relay 1
  3. R1 NC - Normally Closed output for Relay 1
  4. GND - Ground Input for Relay 3
  5. R3 IN - Input for Relay 3
  6. GND - Ground Input for Relay 4
  7. R4 IN - Input for Relay 4
  8. R2 NO - Normally Open output for Relay 2
  9. R2 COM - Common output for Relay 2
  10. R2 NC - Normally Closed output for Relay 2
  1. Press the Test Button to send a signal from one side of the Wiegand Bridge to the other. Signal Strength LEDs will illuminate with the actual Signal Strength.
I/O Description from Left to Right
  1. 12v - Power Input 12v DC
  2. GND - Ground Input for Power
  3. BAT+ - Power Input from Battery
  4. GND - Ground Input from Battery
  5. NC - No Connection
  6. GND - Ground Input for Wiegand Lines
  7. NC - No Connection
  8. NC - No Connection
  9. OUT 1 - Auxiliary data output
  10. IN 2 - Auxiliary data input

Click here to register interest and get your free Evaluation Kit